Testing and maintaining the proper level of chlorine sanitizer in your swimming pool is essential for the safety of swimmers, as well as the longevity of your pool. Chlorine sanitizer test strips provide an accurate and easy way to measure the chlorine level of your pool water. After dipping the test strip into the pool water, the chlorine level can be read from the results on the test strip. Taking the time to understand how to read chlorine sanitizer test strip results is an important part of properly maintaining your swimming pool’s water sanitation.
Steps to Read Chlorine Sanitizer Test Strip Results
Reading the results of chlorine sanitizer test strips is one of the most important steps in ensuring the safety of your water. It allows you to accurately measure the amount of free chlorine in your water, indicating the effectiveness of your sanitization efforts. By understanding how to read chlorine sanitizer test strips, you can stay ahead of potential contamination problems and protect your family’s health. In this article, we’ll explore how to read the results of your hydrion chlorine test strips, what ranges are considered safe levels of chlorine, and how to adjust the sanitizer level to meet pool regulations.
Step 1 – Prepare the Test Strip
Start by taking the test strip and swiping it over a smooth surface to take off any dirt or debris. Make sure the test strip is free of any residue before you dip it in your pool water.
Step 2 – Dip the Test Strip
Securely hold the hydrogen peroxide test strips with the color block portion facing down. Dip the end of the test strip into the water, making sure the color block portion is submerged. For accurate test results, be sure to dip the test strip into the deepest area of your pool for a minimum of two seconds.
Step 3 – Shake Excess Water
Once the test strip has been dipped, gently shake off the water by flicking it with your finger. Make sure you do not rub or scrub the test strip, as this will give you inaccurate results.
Step 4 – Read Results
Once the majority of the water has been removed from the test strip, compare the color of the block to the included color chart. This chart will feature the different colors for different parts per million of chlorine in your pool. Generally, the proper chlorine level for pools is between 1 and 3 parts per million. Anything higher or lower than this may produce a foul smell and/or cloudy water.
Once you have compared the color of the block to the chart, you have an accurate measurement of the chlorine level in your swimming pool. If the chlorine level falls below 1ppm or above 3ppm, it is recommended to add either un-stabilized chlorine granules or calcium chloride to increase the chlorine sanitizer level of your pool.
How to Use Chlorine Sanitizer Test Strips?
Chlorine sanitizer test strips are a great way to quickly and easily measure the chlorine level in your water. Chlorine is an important part of keeping your water safe, so having the correct amount is important. To use a chlorine sanitizer test strip, start by dipping the test strip into the water and holding it there for two minutes. The hydrion test strips should then be removed and compared to the color chart on the bottle of test strips to determine the amount of chlorine in the water. It is important to consider the temperature of the water when interpreting the results and adjust the amount of chlorine accordingly. If the chlorine is too low, simply add chlorine to the water until the proper concentration is achieved. If the chlorine is too high, then the water should be diluted until the concentration is lower. Test strips should be used once a week for optimum safety.
While chlorine sanitizer test strips are not the only way to measure the chlorine level of your swimming pool, they are convenient and easy to use. By understanding the steps and results of chlorine test strips, you can better maintain the chlorine level of your pool water, providing a safe and enjoyable swimming experience.